Download Ceragon FA4800 User manual

set vlan c3 111 egress eth1, s1
set vlan s1 111 fdb-id 5 egress c1, c3, eth0
Configure bridge port management:
set bridge-port c1 s1 admit tagged filter enabled
set bridge-port c1 host pvid 111 prio 6 admit untagged
set bridge-port s1 c1 pvid 111 prio 6
Configure Customer VLANs:
set vlan c4 200-203 egress eth2, s1
Map Management C-VLAN to the Management S-VLAN:
set cvlan-reg c3 eth1 111 svid 111
Configure Service VLAN:
set vlan s1 2000 fdb-id 10 egress c4, eth0
Map the Customer VLANs to the Service VLAN:
set cvlan-reg c4 eth2 200 svid 2000
set cvlan-reg c4 eth2 201 svid 2000
set cvlan-reg c4 eth2 202 svid 2000
set cvlan-reg c4 eth2 203 svid 2000
EH 10 Configuration
Configure RF:
set rf role master frequency 74000 mode adaptive
Configure the IP address:
set ip ip-addr 10.0.0.60 route 10.0.0.1
Remove C-component C2 and attaching the interface ETH0 to the S-component:
clear bridge c2
Configure management for the VLAN:
set vlan c1 111 egress host, s1 untagged host
set vlan c3 111 egress eth1, s1
set vlan s1 111 fdb-id 5 egress c1, eth0
Configure bridge port management:
set bridge-port c1 s1 admit tagged filter enabled
set bridge-port c1 host pvid 111 prio 6 admit untagged
set bridge-port s1 c1 pvid 111 prio 6
Page 71
4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299