Download Sharp FO-165 Specifications

Send Hold Function (Fax Only)
Sending a fax when the Send Hold function is activated
1
Load the document(s).
• If desired, press
2
RESOLUTION
to set the resolution and/or contrast.
Enter the fax number using one of the methods below:
• Press a Rapid Key.
• Press
SPEED DIAL
, enter a 3-digit Speed Dial number, and press
• Enter the full fax number with the number keys and press
• Press
or
.
START
.
Check the name or number that appears in the display. If it is correct,
press
START
to begin dialing and transmission.
• If the name or number is not correct, press
104
.
until the name or number of the other party appears in
the display, and press
3
START
START
STOP
to clear it.