Download Datatool S4 User guide

Your remote control
All S4 systems come supplied with 2 remote controls
as standard. It is possible to add up to 4 extra remote
controls (6 in total).
The picture below show the type of transmitter supplied
with your alarm.
S4 Red/Green standard
02012091 Datatool S4REM
What the buttons do:
There are two buttons on your transmitter.
•The GREY button controls the main arm/disarm functions of the system.
•The BLACK button controls secondary functions such as movement sensor deletion (Ferry Mode) and panic/locate.
Combinations of these buttons control further functions
(described later in the manual).
Should you wish to change the operation of the alarm
from the factory default setting, refer to the relevant
section within this manual for information on how this
effects the operation of the system. If you require
further guidance you should contact your installing
dealer.
3