Download VBrick Systems VB Directory System User guide

Transcript
Using the Scheduler
Record by Manual Entry
When the Record Source is Manual Entry, you can only Record To an NVR.
T
To use Manual Entry as the record source
1.
2.
Select a live stream from the list of Program Names.
Go to Advanced Settings and select Manual Entry.
MPEG-1
Enter a Program Name, or IP Address and Port number.
MPEG-2
Enter a Program Name, or IP Address and Port number.
MPEG-4
Enter a Program Name or URL. If URL, use VBHTTP or RTSP in
following format:
vbhttp://MPEG4Unit1/vbs1d1.sdp
rtsp://172.2.3.4/vbrickvideo1
WM
Enter a Program Name or URL.
H.264
Enter a Program Name or URL.
3.
Select and define MPEG-1 , MPEG-2 , MPEG-4 , WM , or H.264 as the record source and click
Next .
ETV Portal Server User Guide
45