1
Download Savin 4027 Service manual
Transcript
CÓPIA NÃO CONTROLADA 5. TRANSFER BELT UNIT 5.1 TRANSFER BELT UNIT REPLACEMENT – A153, A155, and A156 copiers – – A157, A159, and A160 copiers [A] [C] [A] [B] [C] [B] – A157, A159, and A160 copiers – A153, A155, and A156 copiers – [D] [G] [E] [I] [H] 1. Remove the development unit, drum unit, and fusing unit 2. Disconnect the connector [A]. 3. Remove the transfer belt positioning plate [B] (one screw). 4. Remove the transfer belt unit [C]. NOTE: Never touch the surface of the transfer belt. 5. A153, A155, and A156 copiers: When reinstalling the transfer belt unit, align gear [D] and opening [E]. A157, A159, and A160 copiers: When reinstalling the transfer belt unit, align opening [F] and positioning pin [G] first. Then align gear [H] and opening [I]. FSM 5-29 CÓPIA NÃO CONTROLADA A156/A160/A162 Replacement & Adjustment [F]
