Download Sharp R-230L Operating instructions

General information
The operating instructions must be read carefully
before the equipment is put into operation.
Always keep these operating instructions with the
equipment.
The wire saw system should be handed over to
other persons only complete with the operating
instructions.
Obligation signs
Wear eye protection.
Wear a hard hat.
Wear protective gloves.
Wear respiratory
protection.
Wear ear protection.
Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to Wear safety footwear.
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation Symbols
that could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation
that could lead to slight personal injury or damage to
the equipment or other property.
Read the operating
instructions before use.
NOTE
Draws attention to an instruction or other useful information.
Explanation of the pictograms and other information
A
V
Amps
Volts
Warning:
electricity
Alternating current
Watts
Diameter
Nominal speed
under no load
Revolutions per minute
General warning
W
Hz no ∅ mm
/min rpm STOP
Hertz
Warning signs
Return waste
material for
recycling.
Revolutions per minute
Millimeters
Stop
Warning:
avoid hand injuries
Warning:
Risk of cutting injury
3
Printed: 08.07.2013 | Doc-Nr: PUB / 5069762 / 000 / 01