Download ASM 2730H Specifications

Comfort Reference Value – 5th Generation of STÖBER Inverters
STÖBER
ANTRIEBSTECHNIK
Table of Contents
TABLE OF CONTENTS
1. Notes on Safety
1.1 Hardware
1.2 Software
1
2
3
2. Introduction
KSW-4
3. Selecting the Type of Reference
Value
KSW-5
4. Representing the Reference Values
in User Units
4.1 User Units with a Speed Reference
Value
4.2 User Units for a Torque Reference
Value
4.3 Switching between the Speed/Torque
Reference Value
4.4 Switching between Master/Slave Drive
in Speed/Speed Mode
4.5 Switching between Master/Slave Drive
in Torque/Speed Mode
5. Combining the Reference Values
5.1 Unchanged Main Reference Value
5.2 Main Reference Value + Absolute
Reference Value
5.3 Main Reference Value + Percental
Reference Value
5.4 Factor Reference Value (Weighting)
5.5 Switching the Main Reference Value
KSW-8
KSW-8
KSW-10
KSW-12
KSW-13
KSW-16
KSW-18
KSW-19
KSW-19
KSW-20
KSW-21
KSW-22
6. Available Reference Values
KSW-24
6.1 Reference Value External, Correction
Reference Value 1 and 2
KSW-24
6.2 Preset Values (Fixed Values) and
Preset Reference Values
KSW-26
6.2.1 Preset Reference Values
KSW-26
6.2.2 Preset Values
KSW-31
6.3 Motor Potentiometer
KSW-34
6.4 PID Controller
KSW-39
6.5 N-actual
KSW-46
7. Additional Functions
KSW-47
8. Parameterizing the Speed and
Torque Limits
8.1 Torque Limits
8.2 Speed Limits
KSW-53
KSW-53
KSW-57
9. Additional Functions
9.1 Skipping Speed
9.2 Brake Activation
9.3 Range Control and Display Scaling
9.4 Reference Value Enable
9.5 Events
KSW-60
KSW-60
KSW-62
KSW-63
KSW-67
KSW-68
10. Fieldbus
KSW-69
11. Used Parameters
11.1 Parameter Legend
11.2 Parameter List
KSW-70
KSW-70
KSW-70