Download Zebra 160S User`s guide

Transcript
SYMPTOM
For printers with the Cutter
Option installed: Printing
stops. PAPER/RIBBON,
PAUSE, and CANCEL LEDs
on.
DIAGNOSIS
ACTION
Media jammed in Cutter.
Remove media, clean Cutter Module.
Connecting cable not con-
Plug cable into Cutter Module.
nected to Cutter Module.
Cutter Module is dirty.
Clean Cutter Module.
End of the media is not posi-
Re-position media so that the end is on
tioned correctly on top of the
top of the platen.
platen.
Zebra S-Series User’s Guide
8-5
79