Download RAD Data comm 100 Specifications

Installation and Operation Manual
Chapter 7 Application Tutorial
Egate-100
Main Menu> Configuration> Application> Bridge> Bridge Ports
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Port Number [1 - 130]
Port Name
Bind to
Logical Port Number [1 - 144]
Administrative Status
Ingress Filtering
Accept Frame Types
Port VID [1 - 4094]
Default Priority Tag[0 - 7]
Replace Priority
Egress Tag Handling
Ingress Tag Handling
Loop Detection
Link OAM(802.3ah)
Maximum MAC Address[1 - 64000]
... (101)
... (Bridge Port 101)
(Logical Port)
(11)
>
(Up)
>
(Enable)
>
(Tag Only)
... (1)
... (0)
>
(No)
>
(None)
>
(None)
>
(Enable)
>...(Disabled)
>...(64000)
Please select item <1 to 15>
F - Forward Port; B - Backward Port; R - Remove Port; S - Save
ESC-prev.menu; !-main menu; &-exit
Figure 7-23. Configuring Bridge Port for E1 Ports
Configuring the Bridge VLAN Memberships
You must configure the VLAN memberships as specified in
Egate-100 Ver. 4.0
User and Management Traffic Separated by VLAN
7-17