Download Datamax A-Class Mark II Operator`s manual

Communications (continued)
Menu Item
SERIAL PORT C
Details
Controls the settings for the Applicator Interface COM
C (J4) port, where the setting selections are the same
as those given for the SERIAL PORT A.

SERIAL PORT D
Controls the settings for the Applicator Interface COM
D (J3) port, where the setting selections are the same
as those given for the SERIAL PORT A.

PARALLEL PORT A
PORT DIRECTION
The maximum baud is 38.4K BPS.
The maximum baud is 38.4K BPS.
Controls the communications settings for Parallel Port
A, where:
Allows printer data to be returned to the host, where:
UNI-DIRECTIONAL
Returns no data (one-way communication).
BI-DIRECTIONAL
Returns data (compliant back-channel operation); see
Section 2.3.1 for cable requirements.
NIC ADAPTER
QUICK SETUP
WIRED DHCP
Controls the communications settings for the network
interface, where:
Selects settings to configure basic Wired or WiFi
operations, where:
Selects Wired operation, where:
NO
Exits the menu item without changing the current
settings.
YES
Returns the NIC Adapter to defaults then sets Wired
Discovery to “Enable” and Wireless to “Disable.”
WLAN UNSECURED
Selects WiFi operation, where:
NO
Exits the menu item without changing the current
settings.
YES
Returns the NIC Adapter default values then sets
Discovery to “Enable,” SSID to “Any,” and WLAN
network type to “Infrastructure.”
A-Class Mark II
57