Download Release Notes for Patch 86261-09

Patch 86261-09 For Rapier and AT-8800 Series Switches
PCR: 40236
Module: SWI
3
Level: 2
A Layer 3 filter configured to trap packets with the RouterAlert option did
not always filter MLD packets. This was due to variations in the MLD
packet fields. This issue has been resolved.
PCR: 40258
Module: SWMX
Level: 3
MLD Snooping did not read an MLD report as a correct MLD packet format
when PADN was placed before the Router Alert option. This issue has been
resolved.
PCR: 40263
Module: TACPLUS, USER
Level: 2
Occasionally a fatal error occurred if users were changed with the login
command, and a TACACS+ server authenticated the users. This issue has
been resolved.
PCR: 40271
Module: IGMP, PIM
Level: 2
A static IGMP entry was not created with the create ip igmp destination
command from a configuration script or after enabling PIM for that
interface. A PIM Join was also not created. This issue has been resolved.
Now a PIM Join is sent to the RP following the PIM RP election process.
PCR: 40275
Module: IPV6
Level: 2
It was possible to create two identical 6-to-4 tunnels with the same IPv4
destination. This issue has been resolved.
PCR: 40277
Module: IPG
Level: 2
BGP routes were not always readvertised to peers after a next-hop route
was lost and then reactivated. This issue has been resolved.
PCR: 40279
Module: IPG
Level: 2
Occasionally the device suffered a fatal error if it received a large number of
directed broadcast packets. This issue has been resolved.
PCR: 40285
Module: DHCP
Level: 3
Existing options for DHCP policies could not be removed with the delete
dhcp command. This issue has been resolved.
PCR: 40290
Module: IPG
Level: 3
An incorrect nexthop for a RIP route was advertised in RIP messages. This
issue has been resolved.
PCR: 40298
Module: TTY
Level: 2
When a second device logged in, the CLI command prompt was sometimes
not displayed until the user pressed a key. This issue has been resolved so
that the prompt is displayed immediately.
PCR: 40299
Module: IPG
Level: 2
When the most recently added VLAN was deleted, the switch did not
respond correctly to subsequent DHCP Discover messages. This issue has
been resolved.
Patch 86261-09 for Software Release 2.6.1
C613-10388-00 REV J