Download QMS 4032 Specifications

%#
!"
#$
QMS Document Option Commands (DOCs) can enable job-specific features your
application or page description language can’t access. See your QMS Crown Document Option Commands manual (in Acrobat PDF format on the QMS Software Utilities CD-ROM) for information on DOC. See appendix C, “Document Option
Commands,” of this manual for a list of the supported DOCs.
%"
All the configuration settings available from the control panel are available through
your printer’s Remote Console. You can access Remote Console directly through a
telnet session with your printer. See the QMS CrownNet Interface System Setup
Guide (on the QMS Software Utilities CD-ROM) for information.
The printer’s configuration menu allows you to change the default printer configuration
settings. Any changes made to the configuration will reside as new default settings
and affect all subsequent print jobs.
The options in the configuration menu are organized under three main menus:
Operator Control Menu
Use this menu to select document processing options such as copy count, choosing input and output paper bins, chaining input bins, and duplexing (if a duplexing
unit is installed). Document processing options are usually specified within individual jobs since each job has its own requirements. However, if there’s no way of
specifying these options within an application, use the control panel to change
options, send the job, and then change the defaults back.
»
Note: Defining document processing options for a particular job through the
control panel is not recommended in a shared environment. When many systems
are using the same printer, there’s no way of making sure that no other jobs are
sent to the printer while the defaults are changed. The Operator Control menu
may be password-protected with an optional security key if the system
administrator does not want users changing defaults.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500