Download Dialogic DSI SS7MD Specifications

Dialogic® DSI SS7MD Network Interface Boards Programmer's Manual Issue 4
4.2
General Configuration Messages
General configuration messages are typically issued by the s7_mgt protocol
configuration utility, in which case they need not, and should not, be generated by any
user application software.
The messages in the general configuration category include:
SSD_MSG_RESET - SSD Reset Request
SSD_MSG_RST_BOARD - Board Reset Request
SSD_MSG_BOARD_INFO - Board Information Request
MGT_MSG_CONFIG0 - Board Configuration Request
MGT_MSG_L1_CONFIG - Layer 1 Configuration Request
MGT_MSG_L1_END - Layer 1 Configuration End
4.2.1
SSD_MSG_RESET - SSD Reset Request
Synopsis
Sets up ssd module run-time options at initialization time.
Note:
When using the s7_mgt protocol configuration utility, this message is generated by s7_mgt
and should not be generated by the user.
Format
MESSAGE HEADER
Field Name
Meaning
type
id
src
dst
rsp_req
hclass
status
err_info
len
SSD_MSG_RESET (0x7680)
0
Sending module ID
SSD_module_ID
Used to request a confirmation.
0
0
0
24
PARAMETER AREA
Offset
0
3
4
22
Size
3
1
18
2
Name
Reserved. Set to 0.
mgmt_id
Reserved. Set to 0.
num_boards
Description
This message is used during initialization by the application to reset the ssd module
and set up its run-time parameters.
29