Download Ericsson TT1222 User guide
Transcript
Front Panel LCD Menus Menu title: SET:VIDEO 625 Description Section 4/3 - Generates a 4/3 picture in the method described in the Frame conv. menu item below. Default = Off. Frame Conv: Allows the user to control the type of format conversion carried out on the decoded picture. ---- 14/9 - Generates a 4/3 image using the 14/9 combination method. (Cutoff + Letterbox) 16/9LB - Generates a 4/3 image using the 16:9 letterbox method. 4/3PS - Generates a 4/3 image using the 4:3 Pan and Scan method. (DVB specified). AFD - Generates a 4/3 image as defined in the AFD found in the Video Index AFDWSS - Generates a 4/3 image as defined in the WSSAFD data found in the WSSAFD VBI PES. Default = 4/3PS. Sin(x)/x*: Enables Sin(x)/x testline. ---- Off - Disables the testline. 319 - Enables the testline on line 319. 335 - Enables the testline on line 335. Default = Off. Note: * This option is not available if the Russian SECAM hardware option has been fitted in the receiver and SECAM output mode has been selected. RSECAM *: Enables the Russian SECAM subcarrier reference signal to be configured. ---- LineID - Chrominance subcarrier reference signals are inserted into the back porch of the line blanking period. Line+notch - As LineID but also has a luminance trap filter active in the Vertical Blanking Interval (VBI). Field+notch - Chrominance subcarrier reference signals occupying nine lines of fieldblanking period on Lines 7 to 15 in Fields 1 & 3 and Lines 320 to 328 in Fields 2 & 4. Also has a luminance trap filter active in the VBI. B/W+notch – No chrominance subcarrier is present (monochrome output). Also has a luminance trap filter active in the VBI. Default = LineID. C-18 EN/LZT 790 0002/2 R1A