Download Evolution Rage3B2102 Instruction manual
Transcript
Additional Accessories In addition to the standard items supplied with this machine, other accessories are available to enhance its performance. These include the following items: DESCRIPTION PART No Specialist cutting blades (use only Evolution Blades with this machine) Specific to blade type Dust Collection Bag Specific to machine NOTE: We recommend that when the machine is not in use the Cutting Head is locked in its down position with the latching pin fully engaged in its socket. Step 1 & 2 Additional accessories and information on the use and type of accessory suitable for your machine can be obtained by contacting your local dealer (or Evolution Power Tools). UNLATCHING AND RAISING THE CUTTING HEAD WARNING: To avoid serious injury, NEVER perform the unlocking or locking procedure unless the saw is switched OFF and the blade has stopped turning. To Release the Cutting Head from the Locked Down position: • • • • Step 3 Gently press down on the Cutting Handle. Pull out the head latching pin (Fig. A) and allow the Cutting Head to rise to its upper position. (Step 1 & 2) The Cutting Head will automatically rise to the upper position once it is released from the locked down position. (Step 3) It will automatically lock in the upper position. If Release is Difficult: • • Gently rock the Cutting Head up and down. At the same time twist the Head Latching Pin clockwise and pull outwards. Fig. A www.evolutionpowertools.com 11