Download Mobotix D24M User manual

00&DPHUD0DQXDO23(5$7,1*7+(&$0(5$
Additional Notes
3URWHFWLQJ7KH&DPHUD$JDLQVW&RQGHQVDWLRQ
Due to its robust and carefully constructed design and the lack of mechanical moving parts,
the M24M has some outstanding weatherproof features and is resistant to moisture and
dust. Certified according to the ,3VWDQGDUG, the camera is even resistant to water jets
but is QRWFRPSOHWHO\DLUWLJKW. Installation environments that experience IUHTXHQWFKDQJHV
LQWHPSHUDWXUHDQGKXPLGLW\PD\FDXVHFRQGHQVDWLRQWRRFFXUDQGEXLOGXS in the
cavities of the camera mount through which outside air flows.
Condensation is caused when the temperature of warm moist air, which can absorb
less water in a cooler state, falls below dew point. The condensation is the water that
condenses when it meets the cool surface of an object.
Use 2 mm drill bit
To prevent condensation from building up, MOBOTIX
recommends GULOOLQJDKROHFRUUHVSRQGLQJWRWKH
VL]HRIWKHVSDFHLQTXHVWLRQ in -only- the lower
of the two positions pictured here and breaking
through the outermost housing wall before mounting the camera (see next page).
Before drilling, separate the camera from its housing by removing the two Allen lock screws in order
to prevent damage occurring to the camera or the
cabling.
Before drilling,
remove the camera
from the housing
ũ02%27,;$*š6HFXULW\9LVLRQ6\VWHPVš0DGHLQ*HUPDQ\
ZZZPRERWL[FRPšVDOHV#PRERWL[FRP