Download Davicom DM562AP Specifications

DM562AP
Operation Manual & AT Command Set
Integrated Data/Fax/Voice/Speakerphone Modem
PART III : VOICE MODE COMMAND SET
#VBQ?
Query Buffer Size. (Response 20)
#VBS
#VBS?
#VBS=1
#VBS=2
#VBS=3
#VBS=4*
#VBS=8
Bits Per Sample Selection.
Returns the current setting of #VBS.
Selects 8 bits PCM.
Selects 2 bits per sample ADPCM.
Selects 3 bits per sample ADPCM.
Selects 4 bits per sample ADPCM.
Selects 8 bits per sample ADPCM.
#VBT
#VBT?
Beep Tone Timer.
Returns the current setting of the #VBT
command.
Disables the tone generation capability
Sets tone duration time in 100 msec.
Where
n = 1-40. Default is 10.
Voice Command
#BDR Baud Rate Selection.
#BDR? Returns the current setting of the #BDR.
#BDR=0*
Enable autobaud detection.
#BDR=n
Where n = 1,2,4,6,8,16,24. Sends OK
message and switches to the new
speed defined by n*2400 bps.
#CID
#CID
#CID=0*
#CID=1
#CID=2
#CLS
#CLS?
#CLS.
#CLS=0*
#CLS=2
#CLS=8
Caller ID Selection.
Returns the current settings of #CID.
Disable Caller ID.
Enables formatted Caller ID reporting
Single Data Message (SDM) and
Multiple Data Message (MDM)
packets.
Enables unformatted Caller ID
reporting of any CID packet received
after the first RING cycle including
SDM, MDM, or call waiting packet.
#VBT=0
#VBT=n
#VCI?
Request Compression Method
Information.
Data, Fax or Voice Mode Selection.
Returns the current setting of the
#VLS
#VLS?
#VLS=0*
Selects data mode operation.
Selects fax class 2 command
operation.
Selects voice mode operation.
#VLS=1
Voice Line Selection.
Returns the current setting of the #VLS.
This command causes the telephone
line interface to be routed through the
modem.
This command causes the handset to
be routed through the modem.
This command routes the speaker
through the modem.
This command routes the auxiliary
input device through the modem.
This command is the same as #VLS=0,
except the modem enables the internal
speaker.
This command enables the
microphone and speaker interface, use
for speaker phone mode.
This command enables the
microphone and speaker interface, use
for speaker phone mode.
#MDL? Request Model Information.
#MFR? Request Manufacturer Information.
#VLS=2
#VLS=3
#VLS=4
#REV? Request Revision Information.
#SPK=m,n,o
#TL=XXXX
#TL=0
#TL=1
#TL=2
#TL=3
#TL=4
#TL=5*
#TL=6
#TL=7
#TL=8
22
Speaker Phone Control
m=0 speaker phone mode
m=1 microphone modem
n,o dummy parameters
Voice Playback Volume Control.
mute, means no volume.
-24db, low volume
-18db
-12db
-6db
-0db
+6db
+12db
+18db, high volume
#VLS=5
#VLS=6
#VRX Set Voice Receive Mode
This action command is only valid if the modem
is in the on-line voice command mode.
#VSP
Set Silence detection Period. (0 - 255)
#VSS
Silence Detection Enable/Disable
#VTS
Play DTMF/Tone String.
Preliminary
Version: DM562AP-MA-P01
February 2, 2004