Download UEC DSD 700 Specifications

Decoder, TV (SCART or RF Interfaces), Hi-Fi
NOTE:
It is recommended that you switch off the mains
supply to the decoder before connecting or
disconnecting the LNB connector.
1
Connect the terrestrial antenna connector to the RF IN socket
on the decoder.
2
Connect a flylead between the variable stereo sound outputs
on the decoder and the audio inputs on the Hi-Fi.
3
Connect the coaxial cable connector from the LNB on the
satellite dish into the connector marked LNB IN on the
decoder. The connector on the coaxial cable to the decoder
should be finger tight.
4
Using a SCART-to-SCART cable (not supplied), connect the
TV SCART socket on the decoder to the SCART socket on the
TV.
5
If the TV does not have a SCART socket, use the supplied
flylead to connect the RF OUT connector on the decoder to
tthe RF IN connector on the TV.
TV
Hi-Fi
L
SCART TO SCART
R
AUDIO
INPUT
RF IN
SCART TO RCA
AV CONNECTIONS
WARNING! HighVoltage
DANGER! Do not open
Unauthorised opening
renders warranty invalid
Protect against moisture
RF OUT
VCR
RF IN
TV/AUX
S-Video
MONO
AUDIO
VIDEO
OUT
210 - 250V
V
A
R
I
A
B
L
E
50Hz 30W
LNB IN
L
R
400 m A max.
F
I
X
E
D
LNB OUT
STEREO AUDIO
OUTPUTS
EXTERNAL MODEM
DATA SERVICE
Republic of South Africa
REAR PANEL
DSD 700
OPERATING INSTRUCTIONS
9