Download Estate Swing Instruction manual

Find Limit Positions
1. Manually release the gate and move the gate to the desired closed position.
2. Take a metal washer and drag it along the side of the grey shaft until it is attracted
by the internal magnet.
3. Move the limit switch on the bottom to line up with the washer. Underneath the arm
there are slides secured with Philip head screws. After loosening the screws the switches will be able to slide. (picture of limits on page 4.3)
4. Move the gate to the open position and repeat with the open limit switch (as you
open the gate you can leave the washer on the side and it will move along with the
magnet).
E-S 300 / 302 Classic Series Instruction Manual
4.1