Download Cisco LightStream 1010 Specifications
Transcript
Introduction Supported Devices Supported Devices The SPECTRUM Model SPECTRUM management module SM-CIS1002 currently lets you model the Cisco LightStream 1010 ATM Switch. The LightStream 1010 is a five slot modular chassis that provides switched ATM connections to individual workstations, servers, LAN segments, or other ATM switches and routers, using fiber-optics, unshielded twistedpair (UTP), and coaxial cable. The central slot is dedicated to an ATM Switch Processor (ASP) module that supports both 5 Gbps shared memory and fully non-blocking switch fabric. The ASP card also supports a Reduced Instruction Set (RISC) processor that is the intelligence for the chassis. The remaining slots support up to four Carrier Modules (CAMs) with each of these supporting up to two Port Adapter Modules (PAMs). The model type for the Cisco devices is LS1010. Modeling results in the creation of Device icons that represent the devices and Application icons that represent their supported applications. The Device icons contain double-click zones and provide access to Icon Subviews menus that let you perform device management activities such as those listed in Tasks on Page 9. As Figure 1 shows, the appearance of the Device icons varies slightly depending on the kind of view it appears in. Figure 1: Device Icons Model Name Small Device icon appears in Topology and Application views Model Name Large Device icon appears in Device Topology, Location, and Device Interface views. Device Management Page 7 Cisco LightStream 1010