Download ViewSonic WPCC100 User guide

PC Card UG.book Page 6 Friday, July 23, 2004 2:39 PM
Installation
NOTE: The installation instructions below apply to
Windows XP. Instructions for Windows 98 SE, ME, and
2000 are noted where applicable, and configuration
instructions for these three operating systems are
located in the Appendix.
To install your ViewSonic WPCC100 Wireless 802.11g PC Card
Adapter, do the following:
1 Insert the supplied Network Companion CD into the CDROM drive of your PC. The software automatically starts
the Setup Wizard program.
NOTE: If the CD does not auto-start, right-click Start, select
Explore, double-click the CD-ROM icon, then double-click
the Setup icon.
2 From the home page of the ViewSonic Networking Setup
Wizard (see the illustration on next page), click Wireless
PC Card Adapter.
6
ViewSonic Wireless PC Card Adapter