Download Creative 3D Blaster Installation guide

The 3D Blaster RIVA TNT2 PCI provides outstanding 2D and video acceleration as well and
also supports software DVD decoders through hardware color and pixel format conversion.
Before You Begin
IBM® PC 100% compatible
Genuine Intel Pentium II, AMD-K6 processor or higher, operating at 233MHz or faster.
32 MB system memory
10 MB of available disk space for full installation
VGA, multi-frequency monitor
CD-ROM drive installed
Windows 95, Windows 98, Windows NT 4.0 (with Service Pack 5), or Windows 2000
Minimum System
Requirements
❑
❑
❑
❑
❑
❑
❑
Model and Serial
Numbers
Your card’s model and serial numbers can be found at the back of the card. We recommend
that you record the model and serial number below. This information will be useful in the
event that you need to contact our Technical Support staff for troubleshooting or your dealer
for warranty service.
3D Blaster RIVA TNT2 PCI
Model Number
Serial Number
Read me File
The README file on the CD-ROM contains information not available at the time of printing.
Read it before installing the card.
Updating Drivers
To download the latest drivers for 3D Blaster RIVA TNT2 PCI, visit Creative’s Web site at
www.creativehelp.com
3D Blaster RIVA TNT2 PCI Installation Guide 2