Download MaxACD 6.5.8 Deployment Guide

Transcript
2
In the figure, fifteen G.711 resources are added.
If you need to change these IP addresses in the future, follow these steps:
1
In Windows, choose Start > All programs > AltiGen Lync Server Proxy > AltiGen Lync Server
Proxy Configuration.
2
In this tool, you can add a new IP address, edit an existing address, or remove an address as
needed. You can also change the Lync Front-end Server Pool or Lync Server Registrar information.
After you make your changes, click Apply.
MaxACD for Lync 6.5.8 Deployment Guide
Page 29 of 46