Download MaxACD 6.5.8 Deployment Guide
Transcript
2 In the figure, fifteen G.711 resources are added. If you need to change these IP addresses in the future, follow these steps: 1 In Windows, choose Start > All programs > AltiGen Lync Server Proxy > AltiGen Lync Server Proxy Configuration. 2 In this tool, you can add a new IP address, edit an existing address, or remove an address as needed. You can also change the Lync Front-end Server Pool or Lync Server Registrar information. After you make your changes, click Apply. MaxACD for Lync 6.5.8 Deployment Guide Page 29 of 46