1
Download Compaq AlphaServer ES40 Technical information
Transcript
7.6.6 Configuring Remote Dial-In Before you can dial in through the RMC modem port or enable the system to call out in response to system alerts, you must configure RMC for remote dial-in. Connect your modem to the 9-pin modem port and turn it on. Connect to the RMC CLI from either the local serial terminal or the local VGA monitor to set up the parameters. Example 7–8 Dial-In Configuration ➊ RMC> set password RMC Password: **** Verification: **** RMC> set init Init String: AT&F0E0V0X0S0=2 RMC> enable remote RMC> status . . Remote Access: Enabled . . . ➋ ➌ ➍ NOTE: The following modems require the initialization strings shown here. For other modems, see your modem documentation. Modem Initialization String Motorola 3400 Lifestyle 28.8 AT&F0E0V0X0S0=2 AT &T Dataport 14.4/FAX AT&F0E0V0X0S0=2 Hayes Smartmodem Optima 288 V-34/V.FC + FAX AT&FE0V0X0S0=2 7-24 Compaq AlphaServer ES40 Service Guide
