Download Bosch Rextroth TSplus Technical data
Transcript
8981 500 278 7/09 TSplus Assembly Conveyors Bosch Rexroth Corporation Schematics RELAY LOGIC SEQUENCE 02-01 1) Start signal enables CR1 and rotation begins. LS1 is activated (open). 02-02 2) After 10 degrees of rotation LS1 is de-activated (closed). CR2 and CR3 are enabled and CR1 is disabled, Rotation continues 02-03 3) After 360 degrees of rotation LS1 is activated (open). CR2 and CR3 are disabled and rotation stops. 02-04 02-07 START 1280 JUMPER 3003 CR3 1281 12 PC-1 02-08 02-09 1282 DC COM 02-06 1280 +24VDC 02-05 PC OUT CR1 1280 8 PC-2 8 HOME LIMIT SWITCH 12 1281 LS1-1 LS1-2 1320 14 12 CR1 1284 CR3 12 4 9 1285 1 LIFT AND ROTATE CONTROL +24 VDC START SIGNAL Fig. 11 01-07, 01-08 02-09, 02-12 2.2 mfd 50V 3 1280 1282 BEGIN ROTATION 13 + C1 02-11 02-12 CR1 14 NOTE: ROTATE START PULSE ON TIME 250NS SUPPLIED BY CUSTOMER CR3 02-10 1283 4 + 3 CR2 CR3 SSR1 1282 13 02-07, 02-1002-12 4 4 BEGIN ROTATION 01-07, 01-08 02-19, 01-14 1282 01-04 17