Download Instrument Control Toolbox User`s Guide
Transcript
udp The UDP object must be bound to the local socket with the fopen function. The default remote port is 9090. The default local host in multihome hosts is the system's default. The LocalPort property defaults to a value of [] and it causes any free local port to be used. LocalPort is updated when fopen is issued. When the UDP object is constructed, the Status property value is closed. Once the object is bound to the local socket with fopen, Status is configured to open. The maximum packet size for reading is 8192 bytes. The input buffer can hold as many packets as defined by the InputBufferSize property value. You can write any data size to the output buffer. The data will be sent in packets of at most 4096 bytes. See Also fopen | LocalHost | LocalPort | LocalPortMode | Name | RemoteHost | RemotePort | Status | Type 22-201
Related documents
Instrument Control Toolbox
"user manual"
How to Use Rohde & Schwarz Instruments in MATLAB®
HP Drive User's Manual
Instrument Control Toolbox™ Release Notes
1MA268_e_IVINET_Drivers
remote control of devices with a gpib and matlab
External Interfaces/API
7 - Parent Directory
External Interfaces
Digital Storage Oscilloscope Programming Manual