1
Download Server QOS 8-Bay User guide
Transcript
connUnitPortStatus value Severity ready NORMAL warning WARNING failure CRITICAL nonparticipating INFO initializing INFO bypass INFO ols MAJOR other INFO Trap categories and required user role permissions In general, users with domain role permission can perform any SNMP configuration change operations. Users with network role permission can perform Ethernet configuration change operations, and users with storage role permission can perform FC configuration change operations. The following table provides a summary of trap categories and the required administrative privileges. Trap Category Domain Network Storage VC-Enet Port Status X X — VC-Enet Port Threshold X X — VC-Enet Other X X — VC-FC Port Status X — X VC-FC Other X — X VCM Legacy X — — VCM Security X — — VCM Domain Status X — — VCM Network Status X — — VCM Fabric Status X — — VCM Profile Status X — — VCM Server Status X — — VCM VC-Enet Status X — — VCM VC-FC Status X — — To enable or disable SNMP on a VC-Enet module, domain or network role permissions are required. To enable or disable SNMP/SMI-S on a VC-FC module, domain or storage role permissions are required. Trap severities The severity of traps sent to each destination can be configured, resulting in only traps of the specified severities being sent to the destination. The levels are listed below in decreasing order of severity: • CRITICAL—The component cannot manage installed VC components. • MAJOR—One or more of the component's subsystems is not operating properly, causing serious disruption to functions. • MINOR—One or more of a component's subsystems is not operating properly, causing slight disruption to functions. • WARNING—The component has a potential problem. Virtual Connect domains 36
