Download Compaq TL891 - DLT Tape Library User`s guide

DLT MiniLibrary (TL891) - User’s Guide
5.5
Using the Demo Submenu
The only User Diagnostic is found on the Demo submenu on the Maintenance
Menu. The submenu lists five demos, numbered 1 through 5. At present, only
Demo 1 is implemented. Demo 1 enables the user to fully exercise the library
robotics.
When you select Demo 1, the library robotics begin to move cartridges randomly
from slot to slot in the magazine, while reporting on the front panel the number
of passes. If all ten slots in the magazine are full, Demo 1 will load a cartridge
into DLT0 and leave it there. If you press the button while Demo 1 is running,
the system will load a cartridge into DLT0, unless DLT0 is full. If you press the
button again, the cartridge is unloaded from DLT0 and returned to the
magazine. The button causes DLT1 to be loaded and unloaded in the same
way.
Demo 1 will run continuously as long as the Base Module has power. To stop the
test, press the Escape button. A flashing message appears on the display telling
you that the test is paused. Pressing the Escape button a second time terminates
Demo 1 and returns to the Maintenance Menu.
5–18
EK–TL891–UG. A01