Download Dell 3348 - PowerConnect Switch - Stackable User`s guide

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Switching Port Default Settings
The following table describes the Port default settings.
Port Default Settings
Function
Default Setting
Port speed and mode
10/100M copper ports: auto-negotiation
1000M auto-negotiation
Port forwarding state
Enabled
Port tagging
No tagging
Head of line blocking prevention
On (Enabled)
Flow Control
Off
Back Pressure
Off
The following is an example for changing the port speed on port 1/e5 using CLI
commands:
console> enable
console# configure
Console (config)# interface ethernet 1/e5
Console (config-if)# speed 100
The following is an example for enabling flow control on port 1/e5 using CLI commands:
console> enable
console# configure
Console (config)# interface ethernet 1/e5
Console (config-if)# flowcontrol on
The following is an example for enabling back pressure on port 1/e5 using CLI commands:
console> enable
console# configure
Console (config)# interface ethernet 1/e5
Console (config-if)# back-pressure
44
C o n f i g u r i n g t h e Po w e r C o n n e c t 3 3 2 4 / 3 3 4 8 S w i t c h