Download EXFO IQ-5100 User guide

Safety Information
AC and Power Cable Requirements
AC and Power Cable Requirements
The IQ-203 can operate from any single-phase AC power source between
100 V and 240 V (50/60 Hz). The maximum input current of the IQ-203 is
1.5 A.
The IQ-206 can operate from any single-phase AC power source between
100 V and 240 V (50/60 Hz). The maximum input current of the IQ-206 is
3.0 A.
This unit uses an international safety standard three-wire power cable. This
cable serves as a ground when connected to an appropriate AC power
receptacle. The type of power cable supplied with each unit is determined
according to the country of destination. The figure below illustrates the
different power cables available.
Europe
Australia
South Africa
Great Britain
United States
Only qualified electricians should connect a new plug if needed. The color
coding used in the electric cable depends on the cable. New plugs should
meet the local safety requirements and include the following features:
➤
adequate load-carrying capacity
➤
ground connection
➤
cable clamp
Optical Test System
11