Download Zebra MP6000 Specifications
Transcript
1 - 14 MP6000 INTEGRATOR GUIDE Table 1-2 Features on the MP6000 (Continued) Feature Description Page Platter Stainless steel horizontal scanning surface; imaging window for processing bar code data, and placing items on the surface to determine weight. 5-7 Calibration Switch Used in manual scale calibration (currently unavailable). n/a CSS (Optional) Modular unit that fits into the MP6000 tower; used for customer scanning. 5-6 Scale Display Single or dual display option provides the weight of items on the scale. 5-6 Leveling Screws (medium and short models only) Screws for leveling the MP6000 when shelf mounting is required. Leveling screws are an optional accessory. 1-11 Connectors Connect the MP6000 to peripherals, and POS/host. Table 1-3 Internal USB Cap/Port The internal USB port is available under the platter. 1-11 EAS Cable Channel Cable routing channel for EAS antennas. 1-10 Scale Cable Channel Cable routing channel for the scale cable. 1-10 Drainage/Ventilation Holes Outlet for spills. 1-10 CSS Cable Channels Channels for routing CSS cables. 1-10, 3-16 Table 1-3 Description of Connectors Port Description RS-232 AUX 1 (J7) See Table 2-3 on page 2-13 for description. 0.0 (J6) Scale Display port. RS-232 AUX 2 (J5) See Table 2-3 on page 2-13 for description. CKP I-LOCK (J4) Checkpoint EAS Interlock. AUX A-B (J3) Dual USB 2.0 full speed ports for auxiliary USB scanners, CSS, or mass storage device. NOTE POS (J2) 12V DC (J1) An additional USB port is available in the front under the platter. All USB ports can be used for the USB staging flash drive. See Table 2-14 on page 2-54 and USB Staging Flash Drive on page 5-11 for more information. Point of Sale terminal port. External power input. 12V / 3.33A (not required if powered from terminal). NOTE If a power supply plug is inserted to the J1 connector, with no voltage to the power supply, the scanner will not power up.