Download Cisco 5428 - SN Router System information
Transcript
Chapter 12 Command Line Interface Reference setup access setup access To configure passwords for monitoring and administering the SN 5428-2 Storage Router, use the setup access configuration wizard. The wizard prompts you to enter and confirm new passwords. setup access [parameter1 parameter2...] Syntax Description parameter1 parameter2 (Optional) Enter each parameter that the wizard prompts for. All parameters ... must be passed. If a parameter includes an embedded space, enclose the parameter in quotation marks. Defaults The factory default password for both Administrator mode and Monitor mode is cisco. Command Modes Administrator. Command History Release Modification 3.2.1 This command was introduced. Usage Guidelines The wizard prompts you to enter (and confirm by re-entering) the new Monitor password, which allows view-only access to the storage router. It also prompts you to enter (and confirm by re-entering) the new Administrator password, which allows changes to be made to the storage router configuration. Passwords are cluster configuration elements. In a high availability (HA) cluster, the setup access wizard can only be run from the storage router that is currently performing password management functions. Only one setup wizard can be active at any given time. Multiple users cannot run multiple setup wizards concurrently. Use the optional parameter arguments to run the setup access wizard from a command script. All parameters required by the wizard must be included. The setup access wizard will not complete unless all parameters are passed. Note If too many parameters are passed, the setup access wizard will ignore the extra parameters and may complete. If a parameter is not in the correct format or is otherwise invalid, the next parameter is used to attempt to fulfill the prompt. In either case, unexpected results could occur. Always check the output from a setup access command when using the parameter arguments. Cisco SN 5428-2 Storage Router Software Configuration Guide 78-15471-01 12-341
Related documents
Cisco 5428 - SN Router Specifications
Care & Operation Guide - Inglenook Energy Center
Cisco Systems DSC9148D8G48PK9 User's Manual
HP ISCSI SR2122 User's Manual
Cisco Systems SN 5428-2 User's Manual
PDF - Lenovo Press
IBM System Storage: Implementing an IBM SAN - e
HP SR2122-2 User's Manual
Implementing an Open IBM SAN - ps
Diplomarbeit - Chair of Computer Networks
Cisco SN 5428-2 Installation guide