Download Compaq StorageWorks 6000 - Virtual Library System User guide
Transcript
1. If you are already in the Create Library Wizard window, click Create Tape Drives. The Tape Drive Parameters window opens. 2. If not: a. Click the System tab. b. Select the library in the navigation tree to which you want to add tape drives. c. Click Create Tape Drive in the task bar. The Tape Drive Parameters window opens (Figure 59). Figure 59 Create Virtual Library Wizard window (5 of 12) . 3. Select the type of physical tape drive to emulate. 4. Enter the Fibre Channel host port on which to present the tape drives in the Port Mapping box. Only one port or port pair may be selected. 5. Click Next Step. The next Tape Drive Parameters window opens (Figure 60). Figure 60 Create Virtual Library Wizard window (6 of 12) . HP StorageWorks 6000–series Virtual Library System User Guide 163
Related documents
HP StorageWorks 9030 Virtual Library System User's Manual
Compaq StorageWorks 12000 - Virtual Library System EVA Gateway User guide
HP D2D130 User's Manual
HP OpenVMS 8.3-1H1 User's Manual
Altera SDK for OpenCL Custom Platform Toolkit User Guide
HP VLS1002i User's Manual
Krell Industries S-1000 User's Manual
Showcase Processor