Download Seagate ST3400071FC User`s guide

Command Line Interface Reference
InForm OS Version 2.2.4
–src
Specifies that information about chunklets that are marked as sources of relocation, is
displayed.
–spr
Specifies that information about chunklets that are marked as spares, is displayed.
–log
Specifies that information about chunklets that are logging is displayed.
–sync
Specifies that information about chunklets that are synchronizing with their RAID sets is
displayed.
SPECIFIERS
<PD_ID|pattern>...
Specifies either the physical disk ID using an integer, or a pattern of physical disks, indicated
with a glob-style pattern. Multiple disk IDs or patterns can be specified. See Glob-Style
Pattern on page 2.4 for more information.
–p <pattern>
Specifies a pattern for disks. Patterns are used to select disks that are used for creating
logical disks. If no pattern is specified, the option defaults to all disks of device type Fibre
Channel (FC). If specified multiple times, each instance of the specified pattern adds
additional candidate disks that match the pattern. The -devtype pattern cannot be used
to mix Near Line (NL) and FC drives. The following arguments can be specified as patterns
for this option:
NOTE: An item is specified as an integer, a comma-separated list of integers, or a
range of integers specified from low to high.
–nd <item>
Specifies one or more nodes. Nodes are identified by one or more integers (item).
Multiple nodes are separated with a single comma (1,2,3). A range of nodes is
separated with a hyphen (0–7). The primary path of the disks must be on the
specified node number(s).
22.90