1
Download Enterasys X-Pedition XSR CLI Specifications
Transcript
Dialer Interface Commands XSR(config-if<D3>)#dialer-group 7 XSR(config-if<D3>)#access-list 101 permit ip 0.0.0.0 255.255.255.255 255.255.255.255 0.0.0.0 XSR(config)#dialer-list 7 protocol ip list 101 map-class dialer This command defines the dial stringʹs characteristics and associates them with a unique class name. Once the map-class dialer classname command is executed the parameters assigned to that classname must be configured. The classname assigned must match the classname assigned to the dialer string class classname so they can be linked. Syntax map-class dialer classname classname Unique class identifier. Default None ‐ no class name Mode Global configuration: XSR(config)# Next Mode Map‐Class Dialer configuration: XSR(config-map-class<xx>)# Example The example below specifies a 90‐second wait time for the carrier signal of the dialer map class TEST on Dialer port 0: XSR(config)#interface dialer 0 XSR(config-if<D0>)#ip address 196.16.25.1 255.255.255.0 XSR(config-if<D0>)#encapsulation ppp XSR(config-if<D0>)#dialer remote-name sitea XSR(config-if<D0>)#dialer string 4165555584 class TEST XSR(config-if<D0>)#dialer pool 1 XSR(config-if<D0>)#no shutdown XSR(config)#map-class dialer 57 XSR(config-map-class<57>)#dialer wait-for-carrier-time 90 modem-init-string This command sets an AT command string used to initialize a modem. Syntax modem-init-string word word Text to initialize the modem. XSR CLI Reference Guide 10-89
