1
Download Enterasys X-Pedition XSR CLI Specifications
Transcript
Network Address Translation Commands Syntax ip nat pool name name Name of the IP local pool. Syntax of the “no” Form The no command removes one or more addresses from the NAT pool: no ip nat pool name Mode Global configuration: XSR(config)# Example The following example configures the IP NAT pool NATpool: XSR(config)#ip nat pool NATpool ip nat service list ???SPTD??? This command specifies a port other than the default port for the File Transfer Protocol (FTP). It is used when you want NAT to pass only FTP control sessions that are using that port. In this case, all client requests using the default port (21) will be dropped by NAT. Syntax ip nat service list access-list-number ftp tcp port port-number list acl-number Standard ACL number, ranging from 1 to 199. ftp FTP protocol. tcp TCP protocol. port port-number Port other than the default port. Range: 1 to 65533. Syntax of the “no” Form The no form of the command disables the port: no ip nat service list access-list-number ftp tcp port port-number Mode Global configuration: XSR(config)# Default Disabled Examples The following example configures non‐standard port 2021 for FTP: XSR CLI Reference Guide 5-185
