Download Yamaha Programmable Mixer 01 User`s guide

LCD Functions
15
LCD Functions
ProMix 01 functions without dedicated controls are organized into
LCD functions. They are selected using the function buttons to the
left of the LCD. The name of the selected LCD function appears in
the FUNCTION area of the display.
The following table lists all LCD functions and explains what they do.
LCD Function
Description
UTILITY
Lists the utility functions: OSCILLATOR, SEND3, 4 CONFIGURATION, OUTPUT COMP PATCH POINT, MEMORY PROTECT,
and BATTERY CHECK.
MIDI
Lists the MIDI functions: MIDI SETUP, PROGRAM CHANGE ASSIGN, CONTROL CHANGE ASSIGN, BULK DUMP/REQUEST,
LOCAL ON/OFF, and MEMORY CONTROL CHANGE OUT.
SCENE MEMORY Store and recall mix scenes.
GROUP
Set up the four fader groups.
PAIR
Set up channel pairs.
METER
Meter CH1–16, ST IN, RTN1, RTN2, SEND3, and SEND4 levels.
There are two displays.
PAN/∅
Set pan, balance, and phase. There are three displays.
COMP
Store, recall, and edit COMP1, COMP2, COMP3.
CUE
Set the CUE mode and display channel information.
SEND1
Store, recall, and edit effects programs for internal Effect 1.
SEND2
Store, recall, and edit effects programs for internal Effect 2.
SEND3
Set up SEND3.
SEND4
Set up SEND4.
SEND3-4
This LCD function appears instead of SEND3 and SEND4 in
SEND3-4 stereo mode. There are two displays. The second display contains the channel-to-SEND3-4 pan controls.
EQ
Set the EQ.
LIBRARY
Store and recall EQ programs.
ProMix 01 User’s Guide