Download Directed Electronics 323 Specifications
Transcript
ELM323 Quick Guide for Reading Trouble Codes If you don’t use your ELM323 for some time, this entire data sheet may seem like quite a bit to review if your ‘Check Engine’ light does eventually come on. The following provides a quick procedure which may prove helpful in that case (note that the ‘>’ is the ELM323’s prompt character): Connect using HyperTerminal, ZTerm, etc., 9600 8N1, and no handshaking Ignition Key to ON, but vehicle not running >ATZ to be sure the IC is reset and responding >0100 to be sure the car is responding >0101 to see how many codes are present (look at the second digit of the 3rd byte) >03 to see the codes Ignore the first byte and read the others in pairs. The table on page 12 helps. FIX THE VEHICLE! >04 to reset the codes ELM323DSD Elm Electronics – Circuits for the Hobbyist < http://www.elmelectronics.com/ > 16 of 19