Download Marantz SR4002 User guide

AM Loop
Antenna
FM External
Antenna
Connecting the supplied FM antenna
The supplied FM antenna is for indoor use only.
During use, extend the antenna and move it in various
directions until the clearest signal is received.
Fix it with push pins or similar implements in the
position that will cause the least amount of distortion.
If you experience poor reception quality, an outdoor
antenna may improve the quality.
AM External
Antenna
FM Antenna
INPUT
1
VIDEO
FM (75
75))
GND
TV
SL
C
DVD
VCR IN
VCR OUT
DSS
MONITOR OUT
INPUT
2
CB/PB
Y
CR/PR
MONITOR
OUT 2
CB/PB
Y
4
1
R
SR
SW
7.1CH INPUT
CR/PR
Y
SBL
L
R
(AUX2
AUX2))
SBR
MULTI.
OUT
IN
TV
DVD
OUT
VCR
IN
DSS
OUT
TAPE
HDMI Ver 1.1
COMPONENT
VIDEO
1
AM
ANTENNA
L
INPUT
3
S-VIDEO
IN
OUT
CD/CDR
CB/PB
INPUT 1
CR/PR
IN
INPUT 2
INPUT 3
XM
5
2
DIGITAL IN
3
OPT
OUT
DIGITAL OUT REMOTE CONT.
FLASHER
DC
IN
TRIGGER
OUTPUT
ENGLISH
CONNECTING THE SUPPLIED ANTENNAS
CONNECTING THE ANTENNA TERMINALS
Connecting the supplied AM loop antenna
The supplied AM loop antenna is for indoor use
only.
Set it in the direction and position it to where you
receive the clearest sound. Put it as far away as
possible from the unit, televisions, speaker cables,
and power cords.
If you experience poor reception quality, an outdoor
antenna may improve the quality.
AUDIO
RS-232C
L
SL
SPEAKER C
OFF ON
C
R
L
R
FRONT B
R
SR
SW
SBR
1.
Press and hold down the lever of the AM
antenna terminal.
2.
3.
Insert the bare wire into the antenna terminal.
AC IN
SBL
FRONT A OR B.CENTER.
FRONT A + B : 8 OHMS
L
FRONT A
R
L
SURROUND BACK
SPEAKER C/MULTI SPEAKER
R
L
SURROUND
SURR.SURR BACK : 6-8 OHMS
PRE OUT
CENTER
SPEAKER
SYSTEMS
SWITCHED
1.25A 150W
MODEL NO. SR5002
AC OUTLETS
120V
60Hz
Release the lever.
CONNECTING AN FM OUTDOOR ANTENNA
ASSEMBLING THE AM LOOP ANTENNA
1.
Release the vinyl tie and take out the connection
line.
4.
Place the antenna on stable surface.
Notes:
• Keep the antenna away from noise sources (neon
signs, busy roads, etc.).
• Do not put the antenna close to power lines. Keep it
well away from power lines, transformers, etc.
• To avoid the risk of lightning and electrical shock,
grounding is necessary.
CONNECTING AN AM OUTDOOR ANTENNA
2.
Bend the base part in the reverse direction.
An outdoor antenna will be more effective if it is
stretched horizontally above a window or outside.
Notes:
• Do not remove the AM loop antenna.
• To avoid the risk of lightning and electrical shock,
grounding is necessary.
3.
Insert the hook at the bottom of the loop part
into the slot at the base part.
23
SR4002-5002U DFU_01_E1_2.indd 23
07.7.9 2:46:53 PM