Download Cisco DVR Installation guide
Transcript
Connecting to an HDTV with a DVI Connector Cables Used in this Configuration • 1 Coaxial Cable • 1 HDMI-to-DVI Cable or 1 HDMI Cable and 1 HDMI-to-DVI Adapter • 1 Audio Left/Right Cable Notes: • The DVI port on the TV must support high-bandwidth digital content protection (HDCP). • When you connect the HDMI connector to the DVI connector on your HDTV, you need an HDMI-to-DVI adapter and a separate audio connection. WARNING: Electric shock hazard! Unplug all electronic devices before connecting or disconnecting any device cables to the set-top. CHS 435HDC Video STB SN: XXXXXXXXX Y Digital Audio CableCARD Optical Audio 120 V ~ 60Hz 4.2A 500W MCARD SN: XXXXXXXXX CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN L STB RF MAC: XXXXXXXXXXXX Pb MCARD MAC: XXXXXXXXXXXX L L IR Remote Input CUIDADO: RIESGO DE DESCARGA ELÉCTRICA NO ABRIR CATV Converter Made in Mexico FIOS TV In This device is intended to be attached to a receiver that is not used to receive over-the-air broadcast signals. Connections of thisdevice in any other fashion may cause harmful interference to radio communications and is in violation of the FCC rules, part 15. Audio R Audio Audio Pr SD 120V~ 60Hz 40W R R S-Video HDTV HDTV RF TV Out USB SATA Drive 1394 Firewire Ethernet LISTED 36MW VIDEO PRODUCT FiOS TV Input Back of HDTV AUDIO CENTER CHANNEL IN R S-VIDEO ON DVI/HDCP IN AUDIO IN DVI/HDCP L ANT (75 ) OFF VIDEO Y Y ANT-1 VIDEO L/ MONO AUDIO Pb L Pr AUDIO L/ MONO PB L R PR AUDIO OUT R R R HD 2 IN HD 2 IN OUT IN ANT-2 T14397 15