Download Cruizer SmartYield

SmartYield
Calibration
CHAPTER
Chapter7
7
Setup Screen
Touch the
to access the Setup menu for calibration factors and settings specific to particular crops (except
for density which is set from the Main screen).
Set crop type and
crop settings for
density, moisture
sensor correction
factor, storage
moisture and crop
calibration factor
Diagnostic Functions
Other Factory
Settings
Crop Calibration
Header Setup
Units Clock/Display
Settings Smoothing
Factors
Tag/Data Names, Port Settings,
GPS/Logging Settings
Some settings entered during the initial programming of the system may not need to be modified unless
significant modifications are made to harvest operations or if default settings are restored. To prevent
accidental adjustments, these settings require a PIN number to access and edit the settings. The PIN number
for most menus is ‘1234.’ Enter the PIN number and touch the
key.
Other settings will be modified on a regular basis as port of the normal or daily operating routine. As observed
crop conditions change, regular checks must be performed and the crop settings adjusted as necessary.
Review the Harvest Checklist section on page 30, for adjustments necessary during a harvest operation.
Manual No. 016-0171-451
43