Download A2B Electronics ECX-200 Specifications

11 Technical specification EXM
Connectors and Interfaces
Control and IP out connector
RF input connector
RF output connector
ASI input connector
ASI output connector
CAM connector
LED Indicator lights
SNMP Interface
A/V out connector
RJ-45, 10/100 BaseT
F female, 75 Ω
F female, 75 Ω
BNC female, 75 Ω
BNC female, 75 Ω
PCMCIA (5 VDC)
Power on, Rx error,
Tx/Access error
RJ-45, 10/100 BaseT
3,5 mm 4 pole
QPSK/8PSK Satellite Receiver ESX-200
Input Frequency
Input Level
Input impedance
Spectral inversion
LNB voltage
22kHz to LNB
DiSEqC 1.1
Max input TS bit rate
DVB compliance
950 – 2150 MHz
-65 to -25 dBm
75 Ω
Yes, Auto for C-band LNB
Auto, Off or 13/18V
programmable.
Max. 400 mA. (short
circuit protected)
Auto, On or Off
programmable
Yes, 4 port switch
> 60 Mbit/s DVB-S, DVB-S2
DVB-S (EN 310 421)
DVB-S2 (EN 312 317)
QAM modulation (SW Option)
QAM modes
Symbol rate
MER (at RF out)
DVB compliance
QAM output frequency
Output level
PSI/SI management
Remultiplexing
16, 32, 64, 128 and 256 QAM
4 – 7.2 Mbaud/s
> 38 dB for 256-QAM
DVB-C (EN 310 429)
47 - 862 MHz (1 kHz step)
Min 105 dBuV (47-470 MHz)
Min 100 dBuV (470-862 MHz)
Yes
Yes
COFDM modulation (SW Option)
COFDM mode
Guard interval
FEC
MER
2K
¼, 1/8, 1/16 or 1/32
5/6 or 7/8
>32 dB
DVB compliance
Max output bit rate
DVB-T (EN 310 744)
26,92 Mbit/s (8 MHz bandwidth)
23,55 Mbit/s (7 MHz bandwidth)
20,19 Mbit/s (6 MHz bandwidth)
47 – 862 MHz (1 kHz step)
Min 100 dBuV (47-470 MHz)
Min 95 dBuV (470-862 MHz)
Yes
Yes
Output frequency
Output level
PSI/SI management
Remultiplexing
COFDM Terrestrial Receiver ETX-200
RF Modulation (analogue)
Input frequency
Input freq step size
Input level range
Input impedance
Input return loss
C/N limit
Bandwidth
DVB compliance
Co/adj channel PAL
Automatic mode change
recovery
Echo performance
Standards
Sound
50 - 858 MHz (centre freq.)
250 kHz
-60 to -31 dBm *)
75 Ω
12 dB
18 dB *)
6/7/8 MHz
DVB-T
Compliant to Nordig 2 PAL
Yes
Compliant to Nordig 2 unified
*) QEF reception with test signal: 8k, 64QAM, 1/8 guard
interval, 2/3 FEC
Modulation video
Modulation mono
Output frequency
Output level
S/N weighted
C/N, broadband
NICAM standards
Power ratio
(Vision/NICAM carrier)
Tolerance
Impedance
B/G, I, D/K, L, M/N
Mono, NICAM stereo or
A2/A2* stereo
VSB AM, neg. or pos.
Audio FM or AM
47 – 862 MHz (1 kHz step)
> 110 dBuV (47-470 MHz)
> 105 dBuV (470-862 MHz)
> 57 dB
> 70 dB
NICAM 728 (EN 310 163)
B/G -20dB,
I -24dB,
D/K -24dB,
L -31dB
+/- 1dB
75 Ω
QAM Cable Receiver ECX-200
Input frequency
Input freq step size
Input level range
Input impedance
Input return loss
QAM mode
Baud rates
C/N limit
Bandwidth
DVB compliance
50 - 858 MHz (centre freq.)
250 kHz
-55 to -25 dBm *)
75 Ω
12 dB
16, 32, 64, 128 or 256 QAM
3100 to 7000 kS/s
26 dB *)
8 MHz
DVB-C
*) QEF reception with test signal: 64QAM, 26 dB C/N
This specification may change without prior notice.
51
English