Download Enterasys 802.11 User guide
Transcript
Configuring WLAN Services Field Description Authentication and Accounting NAS Identifier Enter the identifier for the Network Access Server (NAS). The NAS identifier is a RADIUS attribute that identifies the server responsible for passing information to designated RADIUS servers and then acting on the response returned. NAS IP Address Enter the IP address of the Network Access Server. Authentication Primary RADIUS Server Select the primary RADIUS server. Secondary RADIUS Server Select the secondary RADIUS server. Include VSA Attributes AP Name Select to include the name of the AP in Vendor Specified Attributes (VSA). VSAs provide information on the identity of the specific AP that is handling the wireless device, enabling the provision of location-based services. The AP name is not included in VSA attributes by default. Service Name Select to include the WLAN service name in VSA attributes. VSA provide information on the identity of the specific AP that is handling the wireless device, enabling the provision of locationbased services. The WLAN service name is not included in VSA attributes by default. SSID Select to include the SSID of the AP in VSA attributes. VSA provide information on the identity of the specific AP that is handling the wireless device, enabling the provision of locationbased services. The SSID of the AP is not included in VSA attributes by default. Function Buttons Save Click to save your changes. Delete Click to delete the WLAN service. Undo Click to display the most recently saved values for the settings on this screen. Factory Defaults Click to display the factory defaults on this screen.The factory defaults are not applied until you click Save. To configure Dynamic WEP privacy: 1. 2. 4-34 Configure Authentication and Accounting: • Enter the NAS Identifier. • Enter the NAS IP Address. Configure Authentication: • Select the Primary RADIUS Server. • (Optional) Select the Secondary RADIUS Server. 3. (Optional) Select the VSA Attributes — AP Name, Service Name, and/or SSID. 4. Click Save to save your changes. Configuring the Enterasys Wireless Standalone 802.11n AP