Download CM Labs motor mix Specifications
Transcript
Wheel Data Table 2. Wheel Data Wheel data is in the form of “2’s complement” with the 6th bit as the sign bit. Positive numbers are sent for clockwise rotation. These numbers represent the wheel counts accumulated since the last transmission (such as relative position count), similar to what a computer mouse transmits. The resolution is approximately 180 counts per revolution, and transmissions are sent at about 10 milliseconds intervals when the wheel is being turned. Note that for certain switches, such as the Mute switches, each “depressed” message toggles the state of the switch on or off. Table 2. Wheel Data 78 cc Name vv 11h F8 switch 00=release, 7Fh=depressed 12h F9 switch 00=release, 7Fh=depressed 13h REW switch 00=release, 7Fh=depressed 14h FF switch 00=release, 7Fh=depressed 15h Stop switch 00=release, 7Fh=depressed 16h Play switch 00=release, 7Fh=depressed 17h Record switch 00=release, 7Fh=depressed 18h Left Wheel switch 00=release, 7Fh=depressed cc Name vv 00h Mute switch 1 00=release, 7Fh=depressed 19h Right Wheel switch 00=release, 7Fh=depressed 01h-07h Mute switches 2-8 00=release, 7Fh=depressed 1Ah Up cursor switch 00=release, 7Fh=depressed 08h Mode switch 00=release, 7Fh=depressed 1Bh Down cursor switch 00=release, 7Fh=depressed 09h Shift switch 00=release, 7Fh=depressed 1Ch Left cursor switch 00=release, 7Fh=depressed 0Ah F1 switch 00=release, 7Fh=depressed 1Dh Right cursor switch 00=release, 7Fh=depressed 0Bh F2 switch 00=release, 7Fh=depressed 1Eh Footswitch 00=release, 7Fh=depressed 0Ch F3 switch 00=release, 7Fh=depressed 40h Fader 1 Range 0 to 7Fh 41h-47h Faders 2-8 Range 0 to 7Fh 0Dh F4 switch 00=release, 7Fh=depressed 48h Boost/Cut Range 0 to 7Fh 0Eh F5 switch 00=release, 7Fh=depressed 49h Frequency Range 0 to 7Fh 4Ah Bandwidth Range 0 to 7Fh 0Fh F6 switch 00=release, 7Fh=depressed 4Bh Send 1 Range 0 to 7Fh 4Ch Send 2 Range 0 to 7Fh 10h F7 switch 00=release, 7Fh=depressed 4Dh Pan Range 0 to 7Fh 60h Whee 2s complement /7 bits data MIDI Control Surfaces Guide