1
Download Enterasys Matrix E1 1H582-51 Specifications
Transcript
Security Configuration Command Set
Configuring RADIUS
14.3.1.3
clear radius
Use this command to reset RADIUS server settings to default values.
clear radius {[last-resort-action [local | remote]] [retries] [server {index | all}]
[timeout]}
Syntax Description
last-resort-action Resets the last resort local and/or remote action to
local | remote
Challenge.
retries
Resets the maximum number of attempts a user can contact
the RADIUS server before timing out to 3.
server index | all
Resets a specific or all RADIUS server configurations.
timeout
Resets the maximum amount of time to establish contact
with the RADIUS server before timing out to 20 seconds.
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
If local or remote are not specified, all last resort actions will be reset.
Examples
This example shows how to reset configurations on all RADIUS servers:
Matrix>clear radius server all
This example shows how to reset the RADIUS timeout to the default value of 20 seconds:
Matrix>clear radius timeout
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
14-9
