Download Installation Guide - Fujitsu Technology Solutions

- Server switchover (HBA address rename method/ VIOM server profile switchover method)
- Cloning
- Restoration after server replacement
- Server replacement using HBA address rename
When using cloning, you must enter volume license information when installing Resource Orchestrator.
Depending on the version of Windows being used, check the following information prior to installation.
- For Windows Server 2003
Check the product key.
Generally, the product key is provided with the DVD-ROM of the Windows OS purchased.
- For Windows Server 2008
Check the information necessary for license authentication (activation).
The two activation methods are Key Management Service (KMS) and Multiple Activation Key (MAK). Check which method
you will use.
Check the following information required for activation depending on the method you will use.
- Activation Information
Table 2.1 Activation Information Methods and Information to Check
Method
Information to Check
- The KMS host name (FQDN) or the computer name or IP address
KMS (*1)
- Port number (Default 1688) (*2)
MAK
The MAK key
*1: When using Domain Name Service (DNS) to automatically find the KMS host, checking is not necessary.
*2: When changing the port number from the default (1688), correct the definition file after installing agents. For details, refer
to "7.2 Collecting a Cloning Image" of the "User's Guide VE".
- Proxy Server Information
When using a proxy server to connect to the KMS host (KMS method) or the Volume Activation Management Tool (VAMT)
to authenticate a proxy license (MAK method), check the host name or IP address, and the port number of the proxy server.
- Administrator's Password
Check the password as it is necessary for performing activation.
- Windows Administrator accounts
When using Windows Server 2008, check whether Administrator accounts have been changed (renamed).
Environments which have been changed (renamed) are not supported.
2.2.2 Installation [Windows/Hyper-V]
This section explains the procedure for agent installation.
Before installing Resource Orchestrator, check that the preparations given in "2.2.1 Preparations" have been performed.
1. Log on to Windows as the administrator.
Log on to the system on which the agent is to be installed. Log on as a user belonging to the local Administrators group.
2. Start the installer from the window displayed when the first Resource Orchestrator DVD-ROM is set.
Click "Agent installation" which is displayed on the window.
3. The Resource Orchestrator setup window will be displayed.
Check the contents of the license agreement window etc. and then click <Yes>.
- 19 -