Download Installation Guide - Fujitsu Technology Solutions

- On the [Administrative User Creation] window, specify the same character strings for the user account names and passwords on the
primary node and the secondary node.
- On the [Admin LAN Selection] window of the installer, select the network with the same subnet for direct communication with
managed servers.
[Linux]
- Specify the same directory names for both the primary node and the secondary node when entering the image file storage directory
during installation.
However, do not specify a directory on the shared disk for managers.
- Specify the same character strings for the primary node and the secondary node when entering administrative user account names and
passwords during installation.
- Select a network of the same subnet from which direct communication with managed servers is possible when selecting the admin
LAN network interface during installation.
After installation, stop the manager.
Stop the manager using the rcxadm mgrctl stop command.
For details of the command, refer to "5.7 rcxadm mgrctl" in the "Command Reference".
[Windows]
Change the startup type of the following manager services to "Manual".
- Resource Coordinator Task Manager
- Resource Coordinator Web Server(Apache)
- Resource Coordinator Sub Web Server(Mongrel)
- Resource Coordinator Sub Web Server(Mongrel2)
- Deployment Service (*1)
- TFTP Service (*1)
- PXE Services (*1)
- Resource Coordinator DB Server (PostgreSQL)
*1: Not necessary when ServerView Deployment Manager is used in the same subnet.
B.3 Configuration
This section explains the procedure for setting up managers as cluster services (cluster applications) in cluster systems.
B.3.1 Configuration [Windows]
Perform setup on the admin server.
The flow of setup is as shown below.
- 58 -