Download Micro System SIMATIC S7-200

Safety Guidelines
The Two Hour Primer was created as a quick introduction to the world of S7-200 and
has deliberately been kept short. It is not a substitute for the S7-200 manual.
Therefore, please observe the instructions given in the S7-200 manual, especially the
safety guidelines.
Trademarks
®
®
SIMATIC and SIMATIC NET are registered trademarks of Siemens AG.
Third parties using for their own purposes any other names in this document which
refer to trademarks might infringe upon the rights of the trademark owners.
Copyright © Siemens AG 2000 All rights reserved
Disclaimer of Liability
The reproduction, transmission or use of this document or
its contents is not permitted without express written
authority. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a
utility model or design, are reserved.
We have checked the content of this manual for agreement with
the hardware and software described. Since deviations cannot
be precluded entirely, we cannot guarantee full agreement.
However, the data in this manual are reviewed regularly and any
necessary corrections included in subsequent editions.
Suggestions for improvement are welcomed.
Siemens AG
Automation and Drives
Industrial Automation Systems
P.O. Box 4848, D-90327 Nuremberg
Federal Republic of Germany
Siemens Aktiengesellschaft
© Siemens AG 2000
Subject to change without prior notice
Order number: 6ZB5310-0FG02-0BA2