Download PG 720 PII Programming Device - Service, Support

Configuring the PG 720
”Multi-Sector Transfer” Field
The entry in the Multi-Sector Transfer field defines the number of
sectors transferred per interrupt. The value depends on the drive and
should be set only by setting the Type field to Auto.
Disabled
2,4,8,16
sectors
”LBA Mode Control”
field
If the LBA Mode Control field (enabled,disabled) is set to ’Enabled’, the
system supports hard disks with capacities greater than 528 Mbytes.
The value depends on the drive and should be set only by setting the
Type field to Auto.
”32 Bit I/O” Field
The setting in the 32 Bit I/O field defines the mode of access for the
drive
”Transfer Mode” and
”Ultra DMA Mode”
Fields
Disabled
16-bit access
Enabled
32-bit access
(default)
The settings in these fields define the interface’s data-transfer rate. The
value depends on the drive and should be set only by setting the Type
field to Auto.
Hit ESC to exit the submenu.
6-8
PG 720 PII Programming Device
C79000-G7076-C756-02